Yeah, a lot of the new computers dont come with a parallel port...
So, I just got my new Dell Dimension today. Everything's going great until I go to plug my hasp in and find that while it has plenty of USB ports, it DOESN"T HAVE A PARALLEL PORT! Is there anyway to make this HASP work with a USB port or am I stuck having to crack the case on my brand new Dell and install a parallel port?
Similar Threads:
I don't know much about anything but I know a little about everything....
Yeah, a lot of the new computers dont come with a parallel port...
You might want to ask your reseller how much it costs to switch to a USB hasp...
Matt there would be a small cost unless his Key is Hasp3.
cdlenterprises what version are you running by chance?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
[hijack]
Hi Jay, how's it going ?
[/hijack]
Matt, Not bad trying to get a good start for the new year and you?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Pretty good, thanks...
I'm still trying to catch up with last year... LOL
Well Power user Matt, I am with you still playing the same way at work and home.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
I'm still running version 9. I'm not sure what version the hasp is. I'll most likely end up installing a port into it. I'm sure it will come in handy....
I don't know much about anything but I know a little about everything....
Well in that case go to www.simswap.com and download Haspinfo it will test the hasp to see if you can swap it for free to a Hasp4 if it is a hasp3 and they will send you a USB key.
As for neededing a Parriall port I don't see it unless your printer is.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Jay,
Would you happen to know why I am now a power user ?
Is this some special privilege being extended to me or what...
I was actually wondering how Toby got to be the Evil Machinist recently...
Would you happen to know why I am now a power user ?) Actully I do know.
I made you it.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
But do you like it?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Sure, it's better than apprentice, right ?
Maybe you could change it to just Power User ?
Let me think about it.
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
Ok I thought about it , ok
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Thank you Mr. Community Director sir !
Too many Years in a Machine Shop I guess LOL. If you donate to this site they give you special privleges. For instance a Title that you can edit (Evil Machinist) more space for PM's and uploading abilites.
BTW it has been Evil Machinist for quite some time, like since July of '06
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Yeah, I made my post a bit confusing...BTW it has been Evil Machinist for quite some time, like since July of '06
I meant that I had been wondering about it recently not that it had been changed recently...
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com